The best camera mounts depend on what you need to secure, where you can attach it, and how much room your rig has. These picks span flexible clamps, monitor supports, tabletop stands, and camera cages, so match the mounting interface and load guidance to your gear.
Quick Top Products
SmallRig Cool Ballhead Arm Clamp 1138
- Combines a clamp, double ball adapter, and action camera adapter.
- Locks to a rod, tube, table, frame, or tripod with the locking knob; no drilling is required.
- Rated to support up to 1.5 kg.
Best For: Creators who want to position a camera or accessory on a desk, tube, or frame.
SmallRig 9.8-Inch Magic Arm Clamp Kit
- Includes a 9.8-inch articulating arm and a super clamp.
- The clamp jaws open from 15 mm to 54 mm.
- The arm uses 1/4-inch screws at both ends.
Best For: Videographers who need to position a monitor, microphone, or light away from a clamped support point.
SmallRig Field Monitor Mount BSE2346
- Designed for 5-inch and 7-inch monitors.
- Provides 360-degree swivel and 140-degree tilt.
- Supports monitors weighing up to 1.2 kg.
Best For: Camera operators attaching a 5-inch or 7-inch field monitor to a cold shoe.
SmallRig Foldable V-Mount Battery Plate
- Combines an Arca-type baseplate and a V-lock mount.
- Folds and adjusts by 180 degrees.
- It is 3 cm thick when folded and weighs 230 g.
Best For: Mirrorless and DSLR filmmakers who want to add a V-mount battery while keeping the plate foldable for transport.
SmallRig Camera Monitor Mount 6313
- Fits onto a cold shoe and includes a bottom 1/4-inch-20 threaded hole.
- Allows horizontal and vertical monitor placement.
- Provides 180-degree tilt and 360-degree pan.
Best For: Filmmakers who need to move a monitor between landscape and portrait orientations on a cold shoe.
SmallRig 11-Inch Magic Arm Clamp 5311
- Combines an 11-inch magic arm and crab-shaped clamp.
- Fits support diameters from 15 mm to 40 mm.
- Maximum payload is rated at 1.5 kg.
Best For: Vloggers and live-streamers positioning an action camera, monitor, microphone, or light from a tube, table, or tripod leg.
SmallRig 7-Inch Magic Arm Clamp 5310
- Combines a 7-inch arm with a crab-shaped clamp.
- Has retractable pins and a 1/4-inch-20 screw.
- Fits supports 15 mm to 40 mm in diameter.
Best For: Creators who need the same anti-twist clamp-arm approach in a shorter, more compact reach.
SmallRig Adjustable Desk Clamp Camera Stand
- Height adjusts from 19 to 39 inches with the ballhead and clamp.
- The table clamp fits surfaces up to 1.85 inches thick.
- Supports up to 3 kg.
Best For: Streamers, interviewers, and creators who want an elevated camera or light attached to a table.
SmallRig Camera Mount Clamp 4102B
- Includes a removable action camera adapter and threaded mounting points.
- The jaw fits rods from 14 mm and surfaces up to 65 mm thick.
- Moving use is limited to 350 g, with a safety cord and below 50 km/h.
Best For: Action camera users mounting to a bike or motorcycle handlebar who can follow the stated moving-use limits.
SmallRig 15 mm Railblock 942
- Provides two holes for 15 mm rods.
- The 1/4-inch-20 mounting holes have 9 mm spacing.
- Includes short and long screws and a hex spanner.
Best For: Rig builders adding a pair of standard 15 mm rods to a compatible plate, cage, or handle.
Best Adjustable Clamp Arm
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The SmallRig 1138 combines a super clamp, a double ball adapter, and an action camera mount. Its clamp can attach to a rod, tube, table, frame, or tripod, while a locking knob secures the setup without drilling.
The 1/4-inch-20 screw supports cameras, webcams, monitors, lights, and microphones, and the removable action camera adapter widens the mounting options. The clamp is rated for up to 1.5 kg.
This is a flexible choice for a compact desktop or vehicle rig, though moving setups require extra care: the notes recommend a safety rope for dynamic use.
Best For: Creators who want to position a camera or accessory on a desk, tube, or frame.
| Pros | Cons |
|---|---|
|
|
Choose this model when you want one clamp arm to serve different tabletop or rigging positions. The action camera adapter is included, and the 1/4-inch-20 connection suits several other small devices.
Check that the support surface matches the clamp and that your complete setup stays within the 1.5 kg rating. For a moving camera rig, account for the safety rope recommendation.
Best Long-Reach Magic Arm Kit
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This kit pairs a 9.8-inch articulating arm with a super clamp, giving accessories more reach than a compact ballhead mount. The arm has 1/4-inch screws at both ends, and the clamp provides 1/4-inch-20 and 3/8-inch-16 threads.
Its jaws open from 15 mm to 54 mm, so check the support before buying. Rubber cushions line the clamp and arm contact points.
The double ballhead design offers 360-degree adjustment. It can position a monitor, microphone, or light around a camera or tripod, but the kit is not magnetic or corrosion-resistant and is unsuitable for seawater.
Best For: Videographers who need to position a monitor, microphone, or light away from a clamped support point.
| Pros | Cons |
|---|---|
|
|
Pick this kit when your accessory needs more reach and angle adjustment than a short monitor mount provides. Verify the clamp opening fits the intended support and that the gear uses a compatible threaded connection.
Its cushions suit equipment and surfaces that could be scratched, while the seawater restriction matters for marine setups. The extra arm length adds positioning flexibility, but the notes provide no load rating, so check suitability for the specific accessory before mounting.
Best Cushioned Field Monitor Holder
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
The BSE2346 is a compact mount for 5-inch and 7-inch field monitors. Its cold shoe adapter attaches to the top of a camera or another compatible mounting system, while the bottom 1/4-inch-20 screw secures the monitor.
The holder swivels 360 degrees horizontally and tilts 140 degrees vertically, which helps tailor the viewing angle to the shooting position. Rubber cushions add friction and help protect the monitor from scratches.
SmallRig gives a maximum supported monitor weight of 1.2 kg. Check the monitor's size and weight and confirm your camera or support has a cold shoe.
Best For: Camera operators attaching a 5-inch or 7-inch field monitor to a cold shoe.
| Pros | Cons |
|---|---|
|
|
This mount fits a simple monitor-on-camera setup when a cold shoe is available. Its specified monitor sizes, tilt range, and weight limit make fit checks straightforward.
The rubber-cushioned platform is useful for protecting the contact surface. If your cage uses an ARRI locating point or you need a different attachment style, choose a holder designed for that connection instead.
Best Foldable V-Mount Battery Plate
SMALLRIG Foldable V Mount Battery Plate, All-in One Mounting Solution
This foldable plate combines an Arca-type baseplate with a V-lock battery mount, letting compatible mirrorless and DSLR cameras and V-mount batteries connect without tools. Its stretchable design accommodates cameras less than 111 mm thick, and the plate folds or rotates by 180 degrees.
Folded, it is 3 cm thick and weighs 230 g. Removing the Arca-type plate exposes 1/4-inch-20 and 3/8-inch-16 screw holes for other mounting arrangements.
The system also includes threaded expansion points and a mini V-mount plate. Check camera thickness and battery compatibility before buying; the battery is not identified as included.
Best For: Mirrorless and DSLR filmmakers who want to add a V-mount battery while keeping the plate foldable for transport.
| Pros | Cons |
|---|---|
|
|
Choose this plate if your camera rig needs a V-lock battery mounting point and you value a foldable design. Confirm the camera falls within the stated thickness limit and that your battery uses the compatible V-mount interface.
The removable Arca-type plate and additional screw holes offer alternate rigging paths. Since battery inclusion is not specified, verify the package contents before planning a complete power setup.
Best Cold-Shoe Monitor Mount for Portrait or Landscape
SMALLRIG Camera Monitor Mount with Cold Shoe, 180° Tilt and 360° Swivel, Retractable 1/4" Locating Screw Anti-Twist, Damping Adjust, Horizontal & Vertical Shooting
The SmallRig 6313 attaches a monitor through a 1/4-inch screw and mounts to a cold shoe at the bottom. Its retractable 1/4-inch-20 locating screw and locating pins are designed to help resist monitor twist, while a silicone pad protects the contact area.
The mount supports horizontal and vertical installations and provides 180 degrees of tilt and 360 degrees of pan. Tilt damping adjusts with a knob, and an included Allen wrench allows added tightening.
A bottom 1/4-inch-20 threaded hole offers another mounting option. Check the monitor's connection and cold shoe fit before choosing this holder.
Best For: Filmmakers who need to move a monitor between landscape and portrait orientations on a cold shoe.
| Pros | Cons |
|---|---|
|
|
This is a good fit for a monitor that needs portrait and landscape positioning, especially when the camera or handle has a cold shoe. Check that the monitor accepts the top screw and locating arrangement.
The adjustable damping provides control over tilt movement, while the bottom threaded hole creates a second rigging option. Confirm the support point and monitor interface before relying on either mounting route.
Best 11-Inch Anti-Twist Clamp Arm
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 5311 combines an 11-inch magic arm with a crab-shaped clamp. Its 1/4-inch-20 screw and retractable pins help prevent a mounted device from twisting, while an extra hole allows wrench tightening with the included Allen wrench.
The clamp fits tubes, tables, tripod legs, and stabilizer rings from 15 mm to 40 mm in diameter. Built-in pads add grip and protect the contact surface.
SmallRig rates its maximum payload at 1.5 kg. The joints move together using one wingnut.
Measure the intended support and check the payload, particularly if mounting a monitor or light at full extension.
Best For: Vloggers and live-streamers positioning an action camera, monitor, microphone, or light from a tube, table, or tripod leg.
| Pros | Cons |
|---|---|
|
|
Pick the 11-inch arm when the mount needs extra reach and your support falls within its clamp range. Its retractable pins suit compatible action-camera cages and other devices with locating holes; a standard 1/4-inch connection broadens the options.
Keep the complete accessory load within the rated maximum, and remember that a longer arm changes the leverage on the clamp. The one-wingnut adjustment is convenient for repositioning several joints together.
Best Compact Anti-Twist Clamp Arm
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
The 5310 pairs a 7-inch magic arm with a crab-shaped clamp. A 1/4-inch-20 screw, retractable pins, and an anti-twist connection support compatible action camera cages, monitors, microphones, and lights.
The clamp fits tubes, tables, tripod legs, or stabilizer rings from 15 mm to 40 mm in diameter. Pads help protect the clamped surface, and one wingnut loosens or locks the joints together.
Its maximum payload is rated at 1.5 kg. Measure the support and consider whether the shorter reach is enough for the framing you need.
Best For: Creators who need the same anti-twist clamp-arm approach in a shorter, more compact reach.
| Pros | Cons |
|---|---|
|
|
Choose this shorter arm when the mounting point is near the desired camera position and you do not need a longer reach. It shares the 1.5 kg payload and 15 mm to 40 mm support range, so those fit checks still matter.
The shorter span can make for a more compact rig, while the anti-twist connection and retractable pins help suit compatible device cages.
Best Height-Adjustable Desk Stand
SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod
This desk-mounted stand uses a C-clamp base, three extending pole sections, and a 1/4-inch ballhead. Its height range is 19 to 39 inches, measured with the ballhead and C-clamp, and the base accommodates tables up to 1.85 inches thick.
The ballhead provides 360-degree rotation and front tilt from -90 to +45 degrees. It can support up to 3 kg, and the ballhead detaches for another compatible 1/4-inch-20 device.
A ring light adapter is also included. Check the desk thickness and the full rig's weight, and note that the product title's height range differs from the detailed notes.
Best For: Streamers, interviewers, and creators who want an elevated camera or light attached to a table.
| Pros | Cons |
|---|---|
|
|
This stand suits a permanent or semi-permanent desktop setup where a tripod footprint would take up room. Check the desk thickness and height carefully: the detailed notes give a 19-to-39-inch adjustment range, while the title gives a different range.
The 3 kg maximum covers the full mounted setup, and the ballhead's detachable design can accommodate another compatible accessory. A ring light adapter is included for that type of arrangement.
Best Handlebar Clamp for Static or Low-Speed Rigs
SMALLRIG Camera Mount Clamp, Gopro Motorcycle and Bike Handlebar Mount Kit
The 4102B is a crab-shaped clamp with 1/4-inch-20 and 3/8-inch-16 threaded holes, a removable action camera adapter, and a 360-degree ballhead. Its jaw fits rods from 14 mm in diameter and surfaces up to 65 mm thick.
The clamp's maximum load is 3.5 kg at rest, but moving use has much stricter guidance: the device must weigh no more than 350 g, rough terrain should be avoided, a safety cord should be used, and speed should remain below 50 km/h. Those distinctions matter for any bike or motorcycle setup.
Check handlebar dimensions and follow the motion-specific limits.
Best For: Action camera users mounting to a bike or motorcycle handlebar who can follow the stated moving-use limits.
| Pros | Cons |
|---|---|
|
|
Consider this model for a handlebar rig only after measuring the mounting point and matching the camera setup to its motion-specific guidance. The 3.5 kg figure applies at rest; moving use is limited to a 350 g device, with a safety cord, avoidance of rough terrain, and the stated speed ceiling.
Its adapter and adjustable ballhead add versatility, but the moving-use constraints should guide the decision.
Best Single 15 mm Railblock
SMALLRIG Super Lightweight 15mm Railblock, 15mm Rod Clamp with 1/4" Thread
The 942 is a compact railblock with two 15 mm rod holes and mounting points for a plate, cage, or handle. It uses standard 1/4-inch-20 holes spaced 9 mm apart, and the package includes short and long mounting screws plus a hex spanner.
A spring ratchet wingnut tightens the rod and can be repositioned where there is little room to turn it. This is a rig-building component rather than a standalone camera mount: rods and the camera support are not included in the supplied details.
Check rod diameter and screw spacing against your existing rig before ordering.
Best For: Rig builders adding a pair of standard 15 mm rods to a compatible plate, cage, or handle.
| Pros | Cons |
|---|---|
|
|
Choose the 942 when you already have a rig that uses 15 mm rods and need a single railblock to add support or expansion points. Confirm the hole spacing and screw lengths work with your plate or cage.
This is a component, not a complete camera support, so factor in the compatible rods and base hardware. Its ratcheting wingnut is useful when nearby rig parts restrict full turns.
How to Choose Camera Mounts
How We Picked Camera Mounts
This selection covers several practical mounting jobs: clamping a camera or accessory to a surface, adding reach with an articulated arm, positioning an external monitor, raising equipment from a desk, and building around a 15 mm rod system. We favored products with a clear attachment method and useful fit details, such as jaw or rod range, threaded interfaces, monitor size, or load guidance.
The category includes direct supports as well as rig components. A railblock can be useful in a built camera system, but it does not replace rods or a base.
A foldable V-mount plate solves a power and rig-layout problem. Camera cages and grips serve particular camera bodies or handling needs, so check those separately if the goal is a camera mount that attaches broadly.
Comparing Camera Mounts
Start with the support point. A tabletop C-clamp stand needs a desk edge and has a stated thickness limit.
Crab clamps suit tubes, tripod legs, or tables within their individual jaw ranges. A cold shoe monitor holder needs a shoe, while an ARRI-style mount requires the matching locating interface.
These mounting standards are not interchangeable, so verify the connection at both ends of the setup.
Reach changes how a rig behaves. A short mount keeps a monitor close to the camera; an 11-inch arm can move a light or action camera farther from the support point, while the 7-inch version occupies less space.
Longer arms place more leverage on the clamp, so respect the product's load guidance and check that the underlying support is secure.
The included table compares the main interfaces, reach, adjustment, and stated capacity. Treat capacity as product-specific: the handlebar clamp distinguishes its at-rest rating from its lower moving-use limit, and the 15 mm railblock has no overall camera-load figure in the supplied details.
For a monitor, match screen fit, screw type, orientation, and weight limit before selecting a holder.
| Product | Standout features | Best for |
|---|---|---|
| SmallRig Cool Ballhead Arm Clamp 1138Check Price |
| Creators who want to position a camera or accessory on a desk, tube, or frame. |
| SmallRig 9.8-Inch Magic Arm Clamp KitCheck Price |
| Videographers who need to position a monitor, microphone, or light away from a clamped support point. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Camera operators attaching a 5-inch or 7-inch field monitor to a cold shoe. |
| SmallRig Foldable V-Mount Battery PlateCheck Price |
| Mirrorless and DSLR filmmakers who want to add a V-mount battery while keeping the plate foldable for transport. |
| SmallRig Camera Monitor Mount 6313Check Price |
| Filmmakers who need to move a monitor between landscape and portrait orientations on a cold shoe. |
| SmallRig 11-Inch Magic Arm Clamp 5311Check Price |
| Vloggers and live-streamers positioning an action camera, monitor, microphone, or light from a tube, table, or tripod leg. |
| SmallRig 7-Inch Magic Arm Clamp 5310Check Price |
| Creators who need the same anti-twist clamp-arm approach in a shorter, more compact reach. |
| SmallRig Adjustable Desk Clamp Camera StandCheck Price |
| Streamers, interviewers, and creators who want an elevated camera or light attached to a table. |
| SmallRig Camera Mount Clamp 4102BCheck Price |
| Action camera users mounting to a bike or motorcycle handlebar who can follow the stated moving-use limits. |
| SmallRig 15 mm Railblock 942Check Price |
| Rig builders adding a pair of standard 15 mm rods to a compatible plate, cage, or handle. |
Choosing a Clamp or Magic Arm for Video
For a desk, frame, or stationary support, decide whether you need just a clamping ballhead or a longer arm. The SmallRig 1138 combines a clamp and double ball adapter for multiple kinds of gear.
The 9.8-inch kit offers more arm reach, while the 7-inch and 11-inch clamp arms use retractable pins and anti-twist details for compatible devices.
Measure the support before ordering. The clamp kits here specify different ranges, and those numbers refer to the supported object, not a universal fit for every desk edge or handlebar.
Check whether your surface is flat or round, whether the contact pads can seat properly, and whether the device's mounting hole or locating pins match the arm.
Monitor Mount Options for Camera Rigs
A monitor mount should match both the display and the rig. The BSE2346 uses a cold shoe and a 1/4-inch-20 monitor screw, with support specified for 5-inch and 7-inch displays up to 1.2 kg.
The 6313 also uses a cold shoe at its base, but adds portrait or landscape positioning and adjustable tilt damping. Those details matter when the monitor needs to move with the shot.
A cage or handle may instead provide an ARRI locating point or another threaded connection. Check your actual rig before buying, then match the monitor's top connection and the support's bottom interface.
If the display weight limit or supported monitor size is not specified for a mount, confirm fit for your exact setup.
Who Should Buy Which Camera Mount
Choose the 1138 for flexible clamping across desks, tubes, and frames, or the 9.8-inch kit when a longer articulated reach is useful. For a compact anti-twist arm, compare the 7-inch and 11-inch models by the reach your shot needs and the measured support diameter.
For a camera-top display, choose the BSE2346 when its 5-inch or 7-inch monitor fit and cold shoe suit your setup; choose the 6313 when portrait orientation and adjustable damping are useful.
Pick the desk stand for an elevated desktop position, the 4102B only when its moving-use limits fit your handlebar setup, and the 942 railblock when you already use 15 mm rods and need a compatible rig component. Check all included hardware and connection standards before assembling the complete mount.