Best Microphone Stands: 10 Picks for Broadcasting and Recording in 2026

The best microphone stands depend on where you record, how you position your mic, and how much desk or floor space you can spare. These picks cover desk-mounted arms, tabletop stands, a stage-ready tripod, and a podium base, so match the mount style and thread fit to your setup.

Quick Top Products

Low-Profile Desk Clearance

FIFINE Microphone Boom Arm, Low Profile Adjustable Stick Microphone Arm Stand with Desk Mount Clamp, Screw Adapter, Cable Management, for Podcast Streaming Gaming Studio-BM88

The FIFINE BM88 is a low-profile desk arm for podcasting, gaming, and streaming. Its metal construction and cable management help keep a desk setup organized, while the arm reaches 29 inches and moves horizontally through 360 degrees and vertically through 220 degrees.

It includes 1/4-inch, 3/8-inch, and 5/8-inch thread adapters for a range of microphones and shock mounts. The desk clamp fits surfaces 0.8 to 2.4 inches thick.

Check that range against your desk, and note that the section nearest the clamp cannot tilt up and down. The microphone is not included.

Best For: Broadcasters who want a metal desk arm that can extend below a monitor.

Choose the BM88 if monitor clearance and concealed cable routing matter in a fixed desk setup. Its stated 29-inch reach and multiple thread sizes offer flexible placement, while the clamp thickness range is a key fit check.

The fixed vertical section near the clamp limits adjustment at that joint, so consider whether your desk and desired mic position work with the arm's movement. It does not include a microphone.

Check Price on Amazon

Long-Reach Overhead Studio Boom

LyxPro SMT-1 Professional Microphone Stand Heavy Duty 93” Studio Overhead Boom Stand 76” Extra Long Telescoping Arm Mount, Foldable Tripod Legs & Adjustable Counterweight | OVERHEAD STUDIO BOOM STAND: Tall 93 inch mic stand with 76 inch boom for drums, vocals, piano, choirs and recording

The LyxPro SMT-1 is a floor-standing overhead boom for studio and performance setups that need height and reach. Its telescoping body adjusts from 59 to 93 inches, while the boom extends from 45 to 76 inches.

An adjustable counterweight accommodates small and large diaphragm microphones, and integrated clips help manage cables. The tripod legs adjust for balance and fold for storage or transport.

This design takes more room than a desk clamp arm, but its floor base and long boom make it useful when a mic must reach over instruments or performers. Check the available floor footprint and your microphone's mounting thread before choosing it.

Best For: Studio users positioning a microphone above drums, piano, vocals, or a group.

Select the SMT-1 when a desk arm cannot reach above a drum kit, piano, or group performance. The adjustable counterweight and legs support more flexible balancing than a compact desk arm, and the foldable construction helps with breakdown.

Its long reach makes room and placement planning important; confirm that your space can accommodate the tripod and boom. The supplied details do not identify a thread adapter, so check mic mounting compatibility before ordering.

Check Price on Amazon

Simple Scissor Arm for a Desk

Knox Gear 30 Inch Desktop Boom Arm Microphone Stand (Black) | 30-Inch Scissor Boom Arm, 5/8-Inch Thread, Supports Up to 5 Lb, Steel Construction, Desk Clamp Mount

The Knox Gear 30-inch scissor boom arm is a straightforward desk-mounted option for a home broadcast or streaming setup. It uses steel tubing, a desk clamp, and a 5/8-inch thread, with a stated support limit of up to 5 pounds.

Its arms extend vertically and horizontally, and the mount provides 360-degree rotation with a two-axis swivel. That gives useful positioning flexibility without taking up floor space.

Before buying, check that your microphone and any attached mount stay within the stated weight limit and use a compatible thread. The product details do not specify a cable management feature or clamp thickness range.

Best For: Broadcasters seeking an adjustable desk-clamp arm with a stated microphone weight limit.

The Knox Gear arm is a practical fit when you want an adjustable desk clamp and your microphone setup is within its stated 5-pound support limit. Its 30-inch arm and rotating swivel mount offer flexible placement, but the 5/8-inch thread deserves a compatibility check if your mic uses another size.

The available details do not give clamp thickness or cable-routing information, so measure the desk edge and plan how to secure the cable before settling on this option.

Check Price on Amazon

Foldable Entry-Level Scissor Arm

Microphone Arm Stand, FIFINE Suspension Boom Scissor Mic Stand with Heavy Duty Clamp, 3/8" to 5/8" Adapter, for Voice-over, Gaming, Recording, Studio, Home Office (CS1)

The FIFINE CS1 is a compact suspension boom arm for gaming, streaming, voice-over, and home recording. It folds to free desk space and can be carried for recording elsewhere.

Its metal clamp has an anti-scratch pad, a fixed knob, and a mouth that opens up to 2 inches. The arm offers 180-degree up-and-down rotation and comes with a 5/8-inch-to-3/8-inch adapter.

Those details make it a simple fit for many common mic setups, though the product specifically excludes the microphone. Check the clamp opening against your desk and confirm your microphone uses one of the supported thread sizes.

Best For: New podcasters who want a portable folding arm and a clamp for desks up to 2 inches thick.

Pick the CS1 if portability and folding storage matter more than a low-profile arm design. The anti-scratch clamp pad and locking knob are useful for a shared desk or beginner setup, while the included adapter covers 3/8-inch and 5/8-inch mounts.

Its clamp only accommodates desks up to 2 inches thick, so measure the mounting edge. The mic itself is separate, and the arm's documented vertical adjustment is 180 degrees.

Check Price on Amazon

Heavier Mic Support in White

FIFINE Microphone Boom Arm Stand, Metal Heavy Duty Mic Stand, Scissor Suspension Adjustable Boom Arm for Podcast Recording Streaming Gaming, with Desk Clamp, 5/8" Screw, Cable Ties-BM63 White

The FIFINE BM63W is a white metal scissor arm for podcasting, recording, streaming, and gaming. Its stated capacity is up to 2 kg, and its adjustment range is 180 degrees vertically and 135 degrees horizontally.

The arm folds aside when not in use, helping recover desk space. It uses a universal 5/8-inch screw and is identified as compatible with several FIFINE microphones, including K658, K688, K669C, and K669D.

This is a desk-mounted arm rather than a floor stand, so check that your setup can use its clamp and that your microphone has the compatible mounting thread. Clamp thickness is not specified.

Best For: Streamers wanting a foldable scissor arm with a stated 2 kg capacity and white finish.

Consider the BM63W if you prefer a white scissor arm and want a stated capacity of up to 2 kg. Its foldable construction and vertical and horizontal adjustment suit a desk that needs to clear between recording sessions.

The 5/8-inch screw is the main compatibility check; the product details do not mention an adapter. Clamp thickness is also unspecified, so verify both the desk fit and microphone mounting needs before choosing it.

Check Price on Amazon

Foldaway Arm with Cable Ties

FIFINE Microphone Arm Stand-Heavy Duty Boom Arm, Suspension Scissor Adjustable Mic Stand with Desk Mount, C-calmp, 5/8" Screw, Cable Ties, for Recording Gaming Streaming Podcasting-BM63

The FIFINE BM63 is a heavy-duty suspension scissor arm with a metal C-clamp mount. It supports up to 2 kg and adjusts 180 degrees vertically and 135 degrees horizontally, giving users options to position a microphone and fold the arm away after a session.

Three Velcro cable ties are included, which offer a simple way to keep the lead alongside the arm. The universal 5/8-inch screw is compatible with many microphones, and several FIFINE models are named as examples.

Check the clamp's 2-inch maximum desk thickness and thread fit. The microphone itself is not included.

Best For: Home streamers seeking a foldable metal arm with cable ties and 2 kg capacity.

Choose the BM63 if you want cable ties in the box and a scissor arm that folds aside between shows. Its 2 kg capacity and 5/8-inch thread cover many desk recording setups, though the thread may not match every mic without an adapter.

The clamp's 2-inch maximum thickness gives a clear desk fit limit. The included ties organize a cable, but this is not the same as a built-in cable channel.

Check Price on Amazon

Adjustable Floor Stand for Stage Use

LyxPro Microphone Stand Boom Arm Tilting Rotating Floor Podium Stage or Studio Strong Durable And Foldable Height 38.5"- 66" Extends Arm to 29 3/8" Comes With 3/8" and 5/8" mount Adapter

The LyxPro floor boom stand suits stage, podium, and studio placement where a desktop clamp is not convenient. Its height adjusts from 38.5 to 66 inches, and its boom extends 29 3/8 inches.

A base locking knob and boom counterweight support positioning, while the stand is described as lightweight and collapsible. It includes 3/8-inch and 5/8-inch mount adapters, which makes thread fit more flexible across microphone setups.

Compared with a desktop stand, it occupies floor space and needs room for setup. Check the stand height and boom reach against your intended speaking or instrument position.

Best For: Performers who need a collapsible floor stand with a counterweighted boom.

The LyxPro floor boom is the better fit when the microphone needs to reach a seated or standing performer without attaching to a desk. Its two included thread adapters help with mount compatibility, and the counterweight supports boom placement.

It takes floor space, so check the room layout and base footprint; the folded dimensions are not provided. The adjustable 38.5-to-66-inch height and 29 3/8-inch boom offer clear positioning ranges to compare with your setup.

Check Price on Amazon

Weighted Tabletop Stand

LyxPro Desktop Microphone Stand - 9"-14" Adjustable Height Desk Mic Holder - Weighted Cast Iron Base - 3/8"-5/8" Adapter Screw - Table Top with Non-Slip Rubber Feet

This LyxPro tabletop stand offers a compact alternative to an arm when the microphone can sit directly on a desk, counter, or table. Its height adjusts from 9 to 14 inches, and the 6-inch round cast-iron base weighs 2.2 pounds.

The product gives a support limit of up to 6.5 pounds and includes a 3/8-inch-to-5/8-inch adapter screw. Non-slip rubber feet provide contact with the surface.

The short fixed footprint is useful for desk broadcasts and interviews, though it does not reach across a desk like a boom arm. Confirm whether your microphone has a clip or holder that fits the stand.

Best For: Broadcasters and interviewers who want a compact weighted base on a desk or table.

Choose this stand for a broadcast desk or interview table where a compact upright mount works. The adjustable 9-to-14-inch height and 2.2-pound weighted base provide a different setup from a swinging arm, and the adapter supports both 3/8-inch and 5/8-inch threads.

It will not extend a microphone over a keyboard or instrument, so choose a boom if reach matters. Check whether your mic requires a separate clip or holder.

Check Price on Amazon

Mute-Control Podium Base

LyxPro XBM-8 XLR Gooseneck Microphone Desktop Base with On Off Switch | Designed to hold compatible podium-style microphones securely on flat surfaces for speaking, meetings and announcements

The LyxPro XBM-8 is a weighted tabletop microphone base designed for podium-style speech microphones. A compatible mic mounts directly at the top, and the rear audio output connects to professional sound equipment such as mixers, amplifiers, PA systems, and paging systems.

A built-in mute control gives the speaker access to audio control at the base. Rubber bottom padding helps reduce sliding on a table, counter, or lectern.

This is a specialized base rather than a general boom arm or adjustable stand, so confirm microphone compatibility and the sound system connection before choosing it. The microphone and its connection details are not specified as included.

Best For: Meeting rooms, lecterns, and front desks using a compatible podium-style microphone.

Pick the XBM-8 for a meeting room, lectern, or reception counter built around a compatible podium microphone and sound system. Its mute control and rear audio output serve speech-focused installations, but it is not a flexible arm for positioning a general studio mic.

Verify the microphone's fit and the output connection required by your mixer or PA before buying. The supplied details do not identify an included microphone or exact connector type.

Check Price on Amazon

RGB Arm with Hand-Tightened Clamp

FIFINE Microphone Boom Arm, Metal Adjustable Mic Arm Stand with RGB Control, 3/8” to 5/8” Screw Adapter, Desk Mount Clamp, Suspension Scissor Mic Stand for Gaming Streaming Podcast-AmpliGame BM38 | Gaming RGB Mic Arm, Desk Mount Clamp, 3/8” to 5/8” Screw Adapter, for Recording Streaming

The FIFINE AmpliGame BM38 pairs a metal scissor boom arm with controllable RGB lighting for gaming and streaming desks. It supports microphones up to 3.3 pounds, includes 3/8-inch and 5/8-inch thread options, and folds away when not in use.

The arm adjusts through a 180-degree range and the base rotates 360 degrees, allowing mic repositioning for seated or standing use. Its desk clamp installs by hand without tools and includes a silicone pad.

This option adds lighting controls that simpler arms lack, so consider whether that feature suits your setup. Check desk fit and mic weight before mounting.

Best For: Gaming broadcasters who want controllable RGB lighting and a tool-free desk-clamp setup.

The BM38 fits streamers who want RGB integrated into a functional desk arm. Its 3.3-pound support limit, two thread sizes, and foldaway design cover common mic positioning needs, while hand-tightened installation avoids tool setup.

The lighting is the distinguishing feature, so skip it if you prefer a plain arm. Check the microphone plus any attached mount against the weight limit, and confirm the clamp fits your desk because its thickness range is not provided.

Check Price on Amazon

How to Choose Microphone Stands

How We Picked Best Microphone Stands

This roundup focuses on distinct mounting styles that suit broadcasting and recording: low-profile and scissor desk arms, floor booms, weighted tabletop stands, and a podium base. The selected options have clearly identified use cases and useful details such as adjustment range, thread compatibility, support limits, folding design, or cable management.

Several candidates were offers in different colors of the same model. Each model appears once so the choices emphasize different setups rather than repeating near-identical arms.

A podium base remains in the mix because speech-focused installations need a different kind of microphone support than a studio desk does.

Comparing Microphone Stands for Desk, Floor, and Podium

A desk boom arm clamps to an edge and moves the microphone over the work surface. The FIFINE BM88 prioritizes low-profile monitor clearance and built-in cable management; the BM63 adds a stated 2 kg capacity and foldaway scissor construction, with cable ties included in one offer.

The Knox Gear and CS1 are simpler scissor arms, with the CS1 specifically folding for transport and using a clamp that fits desks up to 2 inches thick.

Floor stands suit performers who need the microphone positioned away from a desktop. The LyxPro floor boom adjusts between its documented height and reach ranges, while the LyxPro SMT-1 offers a substantially taller overhead arrangement with an adjustable counterweight.

A weighted tabletop base keeps the stand footprint on the desk, and the XBM-8 serves a narrower podium-microphone role.

Check Mount Style, Reach, and Desk Fit

For a home broadcast desk, start with where the microphone needs to sit. A low-profile arm can reach below a monitor, while a scissor arm can fold out of the way after a stream.

If the arm clamps to the desk, compare the clamp opening or stated thickness range with the edge you plan to use. Several arms here provide that measurement, but others do not, so confirm compatibility before buying.

For a studio overhead microphone, consider both the floor footprint and the boom's maximum reach. A long boom may suit drums, piano, or group recording, but it needs room for the legs and counterweight.

For an interview table, a weighted tabletop stand avoids a clamp and floor tripod, though it cannot sweep the mic across the desk like an arm.

Match Thread Size and Microphone Weight

Microphone stands often connect through threaded mounts. The included adapters vary: some arms provide 3/8-inch and 5/8-inch options, while others use a universal 5/8-inch screw.

Check the microphone, shock mount, or clip you plan to attach; thread fit is especially important for a podium base, whose top connector is intended for compatible speech microphones.

Where a support limit is given, compare it with the microphone and any attached mount together. The BM63 arms state a capacity up to 2 kg, and the RGB BM38 gives a 3.3-pound limit.

The Knox Gear arm specifies up to 5 pounds, while the LyxPro tabletop stand specifies up to 6.5 pounds. These figures describe different products and should not be treated as interchangeable measurements.

Choosing a Microphone Stand for Broadcasting

Broadcasters who record at a fixed desk can start with the BM88 for low-profile clearance or the BM63 for a foldaway arm with a stated support capacity. Choose the Knox Gear or CS1 when a simpler scissor arm meets the mic's thread and desk-fit needs.

The RGB BM38 adds lighting and tool-free clamp setup for a gaming-oriented workspace.

For live speaking or instrument recording, look to the LyxPro floor booms when height and distance matter. A tabletop LyxPro works for compact desk placement, and the XBM-8 is the specialized option for a compatible podium microphone and connected PA or mixer.

Match the support style to the room, then verify mount thread, clamp fit, and the microphone's weight before deciding.