Product Reviews

Samson S-Patch Plus Review: A 48-Point Hub for Studio Routing

A practical choice for recording setups that need centralized, front-access patching and per-pair routing modes.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The Samson S-Patch Plus review is most relevant to recording setups where reaching behind a mixer or rack to change connections slows down the work.

This single-space, 48-point balanced patch bay brings those connections to the front and lets each patch point pair use Normalled, Half-normalled, or Thru operation.

S-Patch Plus Review Summary

The quick verdict

Samson S-Patch Plus
4.8/5

500+ ratings

Read Amazon Reviews

Samson S-Patch Plus

A practical choice for recording setups that need centralized, front-access patching and per-pair routing modes.

  • Provides 48 fully balanced patch points in a single-space rack unit.
  • Uses 1/4-inch phone connections on both the front and rear panels.
  • Places connections and miniature mode toggles at the front for rack access.
  • Allows each patch point pair to be configured for Normalled, Half-normalled, or Thru operation.

Pros

  • Combines 48 balanced patch points in one rack space.
  • Makes front access available for changing connections without reaching behind equipment.

Consider before buying

  • Its 48-point capacity may be more than a compact setup needs.
  • The usefulness of the switching modes depends on planning the rear wiring and intended signal flow.
Read the full review summary

The S-Patch Plus is a centralized hub for routing studio connections.

Its 48 balanced patch points use 1/4-inch phone connections on the front and rear, so gear can remain wired at the back while you make signal connections at the rack’s front.

Per-pair miniature toggles add flexibility for setups that need different routing behaviors across the same bay.

It suits recording rooms and project studios with multiple devices, effects chains, or mixer connections that benefit from a more accessible signal path.

The main tradeoff is that a patch bay is useful only when its connection layout and normaling choices match the way your equipment is wired; plan the rear connections and each pair’s mode before installation.

The buying factors

S-Patch Plus Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

9/10

Routing capacity

Forty-eight balanced patch points in one rack space provide a substantial central connection point for a studio.

9/10

Front-panel access

Front connections and mode switches reduce the need to reach behind the rack when changing signal paths.

8/10

Routing flexibility

Each pair can be set to Normalled, Half-normalled, or Thru operation for different routing needs.

8/10

Rack efficiency

The 48-point layout is housed in a single-space rack unit.

6/10

Setup simplicity

The switching options are useful, though buyers need to map their rear connections and intended routing carefully.

6/10

Fit for small rigs

Its large number of patch points is most valuable when a setup has enough gear and routing changes to use them.

Key Features and Specifications of S-Patch Plus

  • Provides 48 fully balanced patch points in a single-space rack unit.
  • Uses 1/4-inch phone connections on both the front and rear panels.
  • Places connections and miniature mode toggles at the front for rack access.
  • Allows each patch point pair to be configured for Normalled, Half-normalled, or Thru operation.
  • Thru mode routes the rear top input to the front top connection, and the front bottom input to the rear bottom connection.
  • Designed to centralize audio connections for recording signal flow and effects-chain routing.

Pros and Cons of S-Patch Plus

Pros

  • Combines 48 balanced patch points in one rack space.
  • Makes front access available for changing connections without reaching behind equipment.
  • Offers three selectable modes for each patch point pair.
  • Supports a clean, centralized way to organize studio signal routing.

Consider before buying

  • Its 48-point capacity may be more than a compact setup needs.
  • The usefulness of the switching modes depends on planning the rear wiring and intended signal flow.
  • The described connections are 1/4-inch phone plugs, so check that this format fits the equipment and cables in your rack.

Who Should Buy S-Patch Plus?

Good fit

Consider the S-Patch Plus if your recording setup has multiple devices or effects paths and you regularly adjust connections.

Its front-panel patch points can make those changes more convenient while the rear connections remain in place, and the 48-point layout gives a substantial amount of routing capacity in a single rack space.

It is also a strong fit when some connections should follow a normal route while others need a different behavior.

Before buying, sketch the gear connections you want to bring to the bay and decide which pairs need Normalled, Half-normalled, or Thru operation. That planning helps you judge whether the available points and 1/4-inch connections suit your rack.

Who should skip it

Skip it if your setup rarely changes connections and you have no need to centralize them; the available routing capacity may not add much convenience in that case.

Look elsewhere if your equipment and cabling do not use the described 1/4-inch phone connections, or if you need a different number or arrangement of patch points.

How the S-Patch Plus fits a recording setup

Front access changes the workflow

The bay moves connection points from the back of individual devices to a shared front panel.

That is useful when equipment is installed in a rack or positioned where rear-panel access is awkward, since patch changes can be made from the front.

Three modes support varied signal paths

Normalled, Half-normalled, and Thru settings let each pair serve a different routing purpose.

The flexibility is practical for a studio with several signal paths, but it makes a deliberate connection map valuable: set each toggle according to how that pair should pass audio.

Capacity should match the rig

Forty-eight balanced patch points provide room to centralize many connections within a single rack space. That density is attractive for a multi-device setup, while a smaller rig with few connection changes may not make full use of it.

Check the connection format first

The front and rear use 1/4-inch phone connections. Confirm that this matches the equipment connections and cables you plan to route, then map which devices will occupy each point before installing the bay.

Alternatives to S-Patch Plus

No alternative model is recommended here. Compare the connection format, routing modes, and capacity you need before choosing another patch bay.

Is S-Patch Plus Worth It?

The Samson S-Patch Plus is worth considering for recording setups that need a substantial, front-access routing hub. Its 48 balanced patch points, single-space rack format, and per-pair mode choices offer practical flexibility for managing studio connections.

It makes the most sense when the rack has enough equipment and frequent enough routing changes to benefit from a patch bay. Check the 1/4-inch connection format and plan the rear wiring and switch settings before buying.

Your review at a glance

Samson S-Patch Plus
4.8/5

500+ ratings

Read Amazon Reviews

Samson S-Patch Plus

A practical choice for recording setups that need centralized, front-access patching and per-pair routing modes.

  • Provides 48 fully balanced patch points in a single-space rack unit.
  • Uses 1/4-inch phone connections on both the front and rear panels.
  • Places connections and miniature mode toggles at the front for rack access.
  • Allows each patch point pair to be configured for Normalled, Half-normalled, or Thru operation.

Written by

ultimatefmonline.com Editorial Team

Editorial team

ultimatefmonline.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

Samson S-Patch Plus

Samson S-Patch Plus

A practical choice for recording setups that need centralized, front-access patching and per-pair routing modes.

  • Provides 48 fully balanced patch points in a single-space rack unit.
  • Uses 1/4-inch phone connections on both the front and rear panels.
Check Video Reviews on Amazon