The Silkland DP80 DisplayPort Cable review centers on a compact 1.6-foot cable designed for high-bandwidth gaming displays and graphics cards.
Its VESA certification and ambitious supported modes make it compelling for a close-range connection, provided both devices support the features you want to use.
Silkland DP80 Cable Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A fit for gamers connecting nearby DisplayPort 2.1 gear who want a compact cable with high refresh-rate support and VESA certification.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; listed DSC-enabled modes go up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports UHBR20, DSC 1.2a, dynamic HDR10+, HDCP 2.3, VRR, FEC, ALLM and MST.
- Backward compatible with DisplayPort 2.0 and 1.4; supports uncompressed 7.1, 5.1 and 2.0 audio pass-through.
Pros
- Very high stated bandwidth, backed by VESA certification.
- Supports demanding high-refresh modes, including uncompressed 4K at 240Hz.
Consider before buying
- The 1.6-foot reach is restrictive if the PC and monitor are separated or the cable needs a longer route.
- Some of the highest resolution and refresh combinations depend on DSC and compatible equipment.
Read the full review summary
Silkland’s DP80 is a short, male-to-male DisplayPort 2.1 cable with up to 80Gbps bandwidth and VESA certification.
The listed modes include uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz, with higher combinations available when DSC is enabled.
That makes it relevant to demanding monitor setups, though actual output depends on the capabilities of the graphics card, monitor and chosen settings.
Its 1.6-foot length is the defining practical constraint: it works best when a PC and display sit close together, such as on a compact desk or within one monitor setup.
The no-latch connectors, nylon exterior and triple shielding are useful design details, while backward compatibility supports older DisplayPort versions. Choose it for a short connection and high bandwidth; measure your cable route before buying.
The buying factors
Silkland DP80 Cable Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Bandwidth and standard
80Gbps DP 2.1 bandwidth and VESA certification make it a strong match for high-bandwidth setups.
High-refresh support
The listed uncompressed modes reach 4K at 240Hz and 2K at 540Hz, with higher modes using DSC.
Cable reach
At 1.6 feet, it suits close components but leaves little room for routing or repositioning.
Compatibility range
It is backward compatible with DP 2.0 and 1.4 and lists support for DP, DP++ and common adaptive sync technologies.
Build details
Gold-plated connectors, tinned copper, triple shielding and a nylon exterior are useful construction features.
Setup flexibility
MST support can help with multi-monitor arrangements, but the short length limits placement options.
Key Features and Specifications of Silkland DP80 Cable
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; listed DSC-enabled modes go up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports UHBR20, DSC 1.2a, dynamic HDR10+, HDCP 2.3, VRR, FEC, ALLM and MST.
- Backward compatible with DisplayPort 2.0 and 1.4; supports uncompressed 7.1, 5.1 and 2.0 audio pass-through.
- Male-to-male DisplayPort connectors with no latch, 24K gold plating, 28AWG tinned copper conductors and triple shielding.
- Nylon exterior and a 1.6-foot length for short indoor connections.
Pros and Cons of Silkland DP80 Cable
Pros
- Very high stated bandwidth, backed by VESA certification.
- Supports demanding high-refresh modes, including uncompressed 4K at 240Hz.
- Backward compatibility helps it fit into newer and older DisplayPort setups.
- No-latch plugs and compact length can suit crowded, close-range installations.
- MST, adaptive sync and audio pass-through support add flexibility for compatible equipment.
Consider before buying
- The 1.6-foot reach is restrictive if the PC and monitor are separated or the cable needs a longer route.
- Some of the highest resolution and refresh combinations depend on DSC and compatible equipment.
- To use the top DP 2.1 UHBR20 modes, both the graphics card and monitor should support that standard.
Who Should Buy Silkland DP80 Cable?
Good fit
Consider the Silkland DP80 if your graphics card and monitor are close together and you want a short DisplayPort cable for a high-refresh gaming setup.
Its VESA certification, 80Gbps bandwidth and listed 4K 240Hz uncompressed mode make it a capable option on paper for compatible equipment.
Before choosing it, measure the path between the ports, including the bend and routing you need.
Confirm the monitor and graphics card support the resolution, refresh rate and signal features you intend to use; the cable cannot provide modes that either device does not support.
The no-latch connectors may be convenient where access is tight, and the short run keeps excess cable out of the way.
Its construction details and backward compatibility also make it a reasonable fit for a mixed-generation setup, as long as the required cable length is modest.
Who should skip it
Skip this cable if your computer and monitor need more than 1.6 feet of reach, or if the route requires extra slack for a standing desk or frequent equipment movement.
If you are buying specifically for an extreme resolution and refresh-rate combination, first check the monitor and graphics card specifications for UHBR20 and DSC support. Those modes depend on the complete system, not the cable alone.
How the Silkland DP80 Cable Fits a High-Refresh Setup
Bandwidth and display modes
The DP80’s 80Gbps rating and VESA certification suit systems built around high-bandwidth DisplayPort 2.1. Its listed uncompressed modes cover 4K at 240Hz, 8K at 60Hz and 2K at 540Hz.
Higher listed combinations rely on DSC, so buyers should match the desired mode against the capabilities and settings of both connected devices.
A short run with a specific purpose
At 1.6 feet, this cable is best treated as a direct connection between nearby ports. That can keep a compact desktop tidy, but the length leaves little margin for routing around furniture, monitor arms or a PC case.
Measuring the path before ordering is especially useful when the ports face different directions.
Backward compatibility and gaming features
Compatibility with DisplayPort 2.0 and 1.4 gives the cable a role in systems that do not use the latest standard. VRR, FreeSync and G-Sync support are listed for compatible equipment, while MST can support multi-monitor configurations.
The advertised benefits still depend on each device and its configuration.
Build and connection details
The cable uses 28AWG tinned copper conductors, triple shielding, gold-plated connectors and a nylon exterior.
The plugs have no latch, which may make removal easier in a tight space; make sure the connection remains secure in your particular setup.
These construction choices describe the design, but they do not replace checking fit and cable routing.
Alternatives to Silkland DP80 Cable
One useful alternative is included because it offers a distinct longer-reach option for a similar DisplayPort connection.
Computer DisplayPort Cables alternative

7,000+ ratings
Read Amazon ReviewsSilkland 54Gbps DisplayPort 2.1 Cable, 10 ft
Choose the DP80 when the run is short and its higher bandwidth is useful for your compatible display setup. The 10-foot alternative is a more practical fit when you need reach and its listed modes meet your requirements.
- This 10-foot Silkland cable offers 54Gbps bandwidth and lists support for 16K at 60Hz with DSC, 8K at 120Hz and 4K at 240Hz.
- It also has a braided exterior and is backward compatible with DisplayPort versions 1.0 through 2.0.
- The DP80 provides up to 80Gbps bandwidth and a short 1.6-foot length, aimed at nearby devices and higher-bandwidth setups.
Is Silkland DP80 Cable Worth It?
The Silkland DP80 DisplayPort Cable is worth considering for a close-range gaming setup that can use DisplayPort 2.1 bandwidth.
Its VESA certification, 80Gbps rating and broad list of supported features make it an appealing short cable for compatible hardware.
Its main tradeoff is its 1.6-foot reach, and the highest display modes require matching support from the graphics card and monitor.
Measure the route and confirm the target mode before buying; if both checks work, the DP80 is a focused choice for a compact, high-refresh connection.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsSilkland DP80 DisplayPort Cable
A fit for gamers connecting nearby DisplayPort 2.1 gear who want a compact cable with high refresh-rate support and VESA certification.
- VESA-certified DisplayPort 2.1 cable with up to 80Gbps bandwidth.
- Supports uncompressed 4K at 240Hz, 8K at 60Hz and 2K at 540Hz; listed DSC-enabled modes go up to 16K at 60Hz, 8K at 240Hz and 4K at 540Hz.
- Supports UHBR20, DSC 1.2a, dynamic HDR10+, HDCP 2.3, VRR, FEC, ALLM and MST.
- Backward compatible with DisplayPort 2.0 and 1.4; supports uncompressed 7.1, 5.1 and 2.0 audio pass-through.