Product Reviews

SmallRig 1138 Super Camera Clamp Review

A compact clamp for creators who need to attach a small camera, light, monitor, or microphone to a rod, tube, table, or frame.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SmallRig 1138 camera clamp review is for creators who want a flexible way to mount small filming accessories without drilling into a surface.

Its clamp, dual ball head, and included action camera adapter suit compact rigs, while the 1.5 kg maximum load calls for careful attention to the weight and movement of the setup.

SmallRig 1138 Review Summary

The quick verdict

SmallRig 1138 Super Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Super Camera Clamp

A compact clamp for creators who need to attach a small camera, light, monitor, or microphone to a rod, tube, table, or frame.

  • Dual ball head with a 1/4-inch screw for attaching compatible cameras, monitors, lights, microphones, webcams, and other equipment.
  • Clamp mounting intended for a rod, tube, table, frame, or tripod, with a locking knob to tighten the assembly.
  • Maximum load capacity of 1.5 kg; the total mounted setup should remain within that limit.
  • Updated design includes non-slip threads and an anti-twist structure.

Pros

  • Clamps to a range of supports without requiring drilled mounting points.
  • Dual ball head and 1/4-inch screw give compatible gear a flexible mounting position.

Consider before buying

  • The 1.5 kg maximum load limits its suitability for heavier cameras or accessory combinations.
  • A secure hold depends on choosing a compatible support surface and tightening the clamp appropriately.
Read the full review summary

The 1138 combines a clamp for rods, tubes, tables, frames, and tripods with a dual ball head and a 1/4-inch screw for attaching compatible equipment.

An included action camera adapter expands its setup options, and aluminum and stainless steel construction gives the mount a metal build. The manufacturer describes an anti-twist structure and non-slip threads as part of an updated design.

This is a practical choice for desk recording, vehicle setups, and other situations where a compact device needs to be positioned off a support surface.

Its 0.2 kg weight and stated 1.5 kg maximum capacity are useful planning figures, but the clamp still needs a secure grip and a suitable load. For moving setups, the supplied guidance specifically recommends using a safety rope.

The buying factors

SmallRig 1138 Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Mounting flexibility

The clamp can attach to several kinds of supports, and the dual ball head provides angle adjustment.

8/10

Accessory compatibility

The 1/4-inch screw supports compatible cameras and accessories, while an action camera adapter is included.

7/10

Load guidance

A maximum capacity is given, which helps with rig planning; users still need to account for movement and setup stability.

8/10

Portability

At 0.2 kg, the clamp is relatively light to add to a compact filming kit.

8/10

Build materials

Aluminum and stainless steel are specified for the clamp's construction.

8/10

Setup versatility

The no-drill clamp format works across rods, tubes, tables, frames, and tripods when the surface suits its grip.

Key Features and Specifications of SmallRig 1138

  • Dual ball head with a 1/4-inch screw for attaching compatible cameras, monitors, lights, microphones, webcams, and other equipment.
  • Clamp mounting intended for a rod, tube, table, frame, or tripod, with a locking knob to tighten the assembly.
  • Maximum load capacity of 1.5 kg; the total mounted setup should remain within that limit.
  • Updated design includes non-slip threads and an anti-twist structure.
  • Aluminum and stainless steel construction; product weight is 0.2 kg.
  • Package includes the super camera clamp and an action camera mount adapter.
  • For dynamic use, the supplied guidance recommends attaching a safety rope to help prevent a device drop.

Pros and Cons of SmallRig 1138

Pros

  • Clamps to a range of supports without requiring drilled mounting points.
  • Dual ball head and 1/4-inch screw give compatible gear a flexible mounting position.
  • Includes an action camera adapter, broadening its use beyond equipment that attaches directly to the screw.
  • Metal construction and a stated maximum load make the intended setup easier to assess.

Consider before buying

  • The 1.5 kg maximum load limits its suitability for heavier cameras or accessory combinations.
  • A secure hold depends on choosing a compatible support surface and tightening the clamp appropriately.
  • For setups subject to movement, the safety-rope recommendation adds a step and may require a separately sourced tether.

Who Should Buy SmallRig 1138?

Good fit

Consider the 1138 if you need to place a compact camera or accessory on a desk edge, rod, tube, frame, or other compatible support.

The clamp format can help when a tripod position is inconvenient, and the ball head offers a way to aim the mounted device after attachment.

It is best suited to lightweight recording setups that stay within the 1.5 kg maximum.

Before buying, check the thickness and shape of the support where you plan to clamp it, confirm your device has a compatible connection or can use the included action camera adapter, and plan how you will secure the setup if it moves.

Who should skip it

Skip it if your camera and accessories together exceed the stated capacity, or if your mounting point cannot provide a stable surface for a clamp.

For a moving vehicle or other dynamic setup, buy only if you can also secure the equipment with a safety rope.

What the SmallRig 1138 Camera Clamp Means for Your Rig

Mounting freedom with a practical limit

A clamp can open up positions that a conventional tripod footprint cannot reach, especially around a desk, rod, or frame.

That flexibility depends on the support itself: inspect the contact area and make sure the clamp can sit securely before loading the camera.

Plan the complete mounted load

The stated 1.5 kg maximum applies to the gear you attach, so count the camera and any mounted accessories together. Leaving headroom below the limit is a sensible approach when the setup may shift or experience vibration.

Use the right connection for the device

The 1/4-inch screw serves equipment with a matching mount, and the included action camera adapter offers another mounting route. Check the connection on your specific camera or accessory before relying on either arrangement.

Treat dynamic setups with extra care

The manufacturer advises attaching a safety rope in dynamic scenarios. That is especially relevant when the clamp is used around movement: a tether can provide a secondary way to retain the device if the primary mount shifts.

Alternatives to SmallRig 1138

Camera Mounts & Clamps alternative

SmallRig 2732 Magic Arm Clamp Kit
4.6/5

3,000+ ratings

Read Amazon Reviews

SmallRig 2732 Magic Arm Clamp Kit

Choose the 1138 for a more direct clamp-and-ball-head arrangement with an action camera adapter included.

Consider the 2732 if you need a longer 9.8-inch arm and the additional threaded mounting points; check the arm's reach and the opening range against your setup.

  • The 2732 pairs a super clamp with a 9.8-inch articulating arm, has 1/4-inch and 3/8-inch clamp threads, and is described with a 15–54 mm clamp opening and rubber cushions.
  • The 1138 is a direct clamp mount with a dual ball head and an included action camera adapter, with a stated maximum load of 1.5 kg.

Camera Mounts & Clamps alternative

SmallRig Super Clamp with 1/4- and 3/8-Inch Threads
4.7/5

2,000+ ratings

Read Amazon Reviews

SmallRig Super Clamp with 1/4- and 3/8-Inch Threads

The 1138 is the more complete fit if you want a dual ball head and action camera adapter in the package.

The standalone clamp may suit a buyer who needs its threaded mounting points and rubber-padded jaws, provided the opening and load guidance fit the intended support and gear.

  • This super clamp has 1/4-inch and 3/8-inch threaded holes, rubber pads, and a jaw opening of about 15–40 mm; its description gives a maximum weight recommendation of 3.3 pounds.
  • The 1138 includes a dual ball head and action camera adapter for attaching compatible gear directly to its clamp assembly.

Is SmallRig 1138 Worth It?

The SmallRig 1138 is worth considering for lightweight creator rigs that need a clamp-on mounting point and adjustable angle. Its dual ball head, 1/4-inch screw, and included action camera adapter cover several common accessory setups.

Buy it when your gear stays within the stated 1.5 kg capacity and you have a support surface the clamp can grip securely.

For moving setups, follow the safety-rope guidance; if your rig is heavier or needs a longer reach, compare the mounting requirements before choosing.

Your review at a glance

SmallRig 1138 Super Camera Clamp
4.6/5

8,000+ ratings

Read Amazon Reviews

SmallRig 1138 Super Camera Clamp

A compact clamp for creators who need to attach a small camera, light, monitor, or microphone to a rod, tube, table, or frame.

  • Dual ball head with a 1/4-inch screw for attaching compatible cameras, monitors, lights, microphones, webcams, and other equipment.
  • Clamp mounting intended for a rod, tube, table, frame, or tripod, with a locking knob to tighten the assembly.
  • Maximum load capacity of 1.5 kg; the total mounted setup should remain within that limit.
  • Updated design includes non-slip threads and an anti-twist structure.

Written by

ultimatefmonline.com Editorial Team

Editorial team

ultimatefmonline.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SmallRig 1138 Super Camera Clamp

SmallRig 1138 Super Camera Clamp

A compact clamp for creators who need to attach a small camera, light, monitor, or microphone to a rod, tube, table, or frame.

  • Dual ball head with a 1/4-inch screw for attaching compatible cameras, monitors, lights, microphones, webcams, and other equipment.
  • Clamp mounting intended for a rod, tube, table, frame, or tripod, with a locking knob to tighten the assembly.
Check Video Reviews on Amazon