Product Reviews

SMALLRIG Universal Phone Holder Mount Review: A Flexible Camera Setup

A practical choice for creators who want to mount a compatible phone on a camera or tripod and add a microphone or light.

This article contains affiliate links. We may earn a commission if you buy through them, at no extra cost to you.

The SMALLRIG Universal Phone Holder Mount review comes down to a useful mix of adjustable phone positioning and accessory mounting in a compact camera rig.

Its clamp fits phones 57–88 mm wide and attaches through either a 1/4-inch thread or a cold shoe.

SMALLRIG 4382 Mount Review Summary

The quick verdict

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A practical choice for creators who want to mount a compatible phone on a camera or tripod and add a microphone or light.

  • Clamps smartphones measuring 57–88 mm wide.
  • Attaches to a camera or tripod via a bottom 1/4-inch-20 threaded hole or cold shoe.
  • Supports landscape and portrait orientations, with a locking position when rotated 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.

Pros

  • Two mounting options make it adaptable to compatible camera and tripod setups.
  • The adjustable joints and portrait-to-landscape rotation help with varied framing.

Consider before buying

  • The phone must fall within the 57–88 mm width range, so check the device's dimensions before buying.
  • The maximum load capacity is 500 g, which limits how much weight the holder and attached gear should carry.
Read the full review summary

The SMALLRIG Universal Phone Holder Mount 4382 is designed to make a phone easier to incorporate into a camera or tripod setup.

Two rotary joints allow up to 180 degrees of adjustment, while the holder can switch between landscape and portrait orientation and lock when rotated 90 degrees.

Its appeal is strongest for mobile creators who want a phone alongside existing camera gear for streaming, vlogging, interviews, or photography.

The top cold shoe can take a microphone or light, and threaded holes are provided for compatible power bank holders. At 73 g, the mount adds little weight, though its stated maximum load capacity is 500 g.

The buying factors

SMALLRIG 4382 Mount Scorecard

Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.

8/10

Phone compatibility

The 57–88 mm width range covers many phones, though fit depends on the device's width.

8/10

Mounting flexibility

A bottom 1/4-inch thread and cold shoe provide two ways to attach the holder to compatible gear.

8/10

Orientation changes

Landscape and portrait positioning with a 90-degree locking rotation suits changing shot formats.

8/10

Angle adjustment

Two rotary joints offer up to 180 degrees of adjustment for positioning the phone.

7/10

Accessory expansion

The top cold shoe supports a microphone or light, and threaded holes accommodate compatible power bank holders.

6/10

Load capacity

The 500 g maximum is a clear limit to keep in mind when choosing the phone and attached accessories.

Key Features and Specifications of SMALLRIG 4382 Mount

  • Clamps smartphones measuring 57–88 mm wide.
  • Attaches to a camera or tripod via a bottom 1/4-inch-20 threaded hole or cold shoe.
  • Supports landscape and portrait orientations, with a locking position when rotated 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.
  • A top cold shoe accommodates a microphone or light.
  • Well-spaced threaded holes support compatible SMALLRIG power bank holders.
  • The mount weighs 73 g and has a maximum load capacity of 500 g.

Pros and Cons of SMALLRIG 4382 Mount

Pros

  • Two mounting options make it adaptable to compatible camera and tripod setups.
  • The adjustable joints and portrait-to-landscape rotation help with varied framing.
  • The top cold shoe leaves room to add a microphone or light.
  • Its 73 g weight keeps the mount itself light in a portable kit.

Consider before buying

  • The phone must fall within the 57–88 mm width range, so check the device's dimensions before buying.
  • The maximum load capacity is 500 g, which limits how much weight the holder and attached gear should carry.
  • Only the phone holder is included, so any camera, tripod, microphone, light, or power bank holder must be sourced separately.

Who Should Buy SMALLRIG 4382 Mount?

Good fit

Consider the SMALLRIG Universal Phone Holder Mount 4382 if you want to position a phone on a camera or tripod and switch between portrait and landscape framing.

The two rotary joints give you room to adjust the angle, while the 90-degree lock offers a defined orientation change.

It is also a sensible fit for a creator building a compact phone rig with a microphone or light on the top cold shoe.

Before ordering, check that your phone is 57–88 mm wide and that the combined load is within the 500 g maximum.

Who should skip it

Look elsewhere if your phone is outside the supported width range, or if your setup needs to carry more than 500 g.

Also consider your mounting hardware first: this holder works through a 1/4-inch-20 thread or a cold shoe, so your intended camera or tripod connection needs to match.

How the SMALLRIG 4382 Mount Fits a Mobile Camera Rig

Mounting options for camera and tripod setups

The bottom offers both a 1/4-inch-20 threaded hole and a cold shoe, giving you a choice of connection points on compatible gear.

That flexibility can help when moving the phone between a camera rig and a tripod, but it is worth checking which mount your setup can accept before purchase.

Positioning the phone for different shots

Two rotary joints provide up to 180 degrees of adjustment, and the holder can shift between landscape and portrait orientation.

The 90-degree locking position gives a clear point for that rotation, which can be useful when switching between horizontal video and vertical content.

Adding light or audio accessories

A cold shoe on top is intended for a microphone or light, while the threaded holes support compatible power bank holders.

This creates options for a more complete mobile setup, though the holder is sold with the phone mount only; buyers should plan for the other components separately.

Checking fit and total load

The clamp supports phones 57–88 mm wide, and the stated maximum load is 500 g. Confirm the phone's width and account for any accessories attached to the mount so the planned setup stays within that limit.

Alternatives to SMALLRIG 4382 Mount

One distinct alternative is included for buyers comparing different phone attachment approaches.

Cell Phone Camera Mounts alternative

SMALLRIG Magnetic Metal Phone Mount 5156
4.6/5

700+ ratings

Read Amazon Reviews

SMALLRIG Magnetic Metal Phone Mount 5156

Choose the 4382 if you want a clamp that fits phones by width and prefer its specified 1/4-inch thread or cold shoe attachment options.

The 5156 is a more relevant fit for a compatible MagSafe iPhone user who wants a magnetic mounting approach and a detachable accessory plate; check its compatibility and connection needs before choosing.

  • The Magnetic Metal Phone Mount 5156 is designed for iPhones with MagSafe functionality, supports portrait and landscape switching, and has dual rotating shafts.
  • Its top round plate detaches for use as a mounting plate, and the package includes an Allen wrench.
  • The Universal Phone Holder Mount 4382 uses a width-based clamp for phones from 57–88 mm and provides two rotary joints for adjustment.

Is SMALLRIG 4382 Mount Worth It?

The SMALLRIG Universal Phone Holder Mount 4382 is worth considering for mobile creators who want a lightweight, adjustable way to position a compatible phone on a camera or tripod.

Its dual mounting options, orientation changes, and top cold shoe support a flexible small rig.

Check your phone width, the connection available on your camera or tripod, and the 500 g maximum load before buying.

If those constraints fit your setup, the 4382 offers a straightforward way to add a phone to a camera workflow.

Your review at a glance

SMALLRIG Universal Phone Holder Mount 4382
4.6/5

2,000+ ratings

Read Amazon Reviews

SMALLRIG Universal Phone Holder Mount 4382

A practical choice for creators who want to mount a compatible phone on a camera or tripod and add a microphone or light.

  • Clamps smartphones measuring 57–88 mm wide.
  • Attaches to a camera or tripod via a bottom 1/4-inch-20 threaded hole or cold shoe.
  • Supports landscape and portrait orientations, with a locking position when rotated 90 degrees.
  • Two rotary joints provide up to 180 degrees of adjustment.

Written by

ultimatefmonline.com Editorial Team

Editorial team

ultimatefmonline.com publishes practical how-to guides and educational articles with clear steps and useful context.

Amazon customer reviews

See what buyers think

Explore customer reviews, photos and available video reviews on Amazon.

SMALLRIG Universal Phone Holder Mount 4382

SMALLRIG Universal Phone Holder Mount 4382

A practical choice for creators who want to mount a compatible phone on a camera or tripod and add a microphone or light.

  • Clamps smartphones measuring 57–88 mm wide.
  • Attaches to a camera or tripod via a bottom 1/4-inch-20 threaded hole or cold shoe.
Check Video Reviews on Amazon