The VIVO Dual Vertically Stacked Ultrawide Monitor Desk Mount review is for anyone planning a tall, space-conscious setup with two large screens rather than a conventional side-by-side pair.
Its capacity and range of adjustment make it promising for compatible ultrawides, but monitor weight, VESA pattern, desk thickness, and the stacked layout all deserve a careful check before buying.
VIVO STAND-V257R Review Summary
The quick verdict

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V257R Dual Ultrawide Monitor Mount
A desk-clamp mount for buyers stacking two large ultrawide screens vertically, with broad adjustment and support for select VESA patterns.
- Supports two ultrawide screens up to 57 inches; the maximum supported weight is 48.4 lb per curved screen or 59.4 lb per flat screen.
- Also supports TVs up to 43 inches, subject to the mount’s other compatibility requirements.
- Offers +55° to -35° tilt, 132° swivel on the bottom arm, 360° swivel on the top arm, 180° rotation on the bottom arm, and 360° rotation on the top arm.
- Screen height adjusts along the center pole.
Pros
- Supports two very large ultrawide screens in a vertical arrangement.
- Allows different movement on the top and bottom arms, including full rotation on the top arm.
Consider before buying
- The desk must fit within the specific thickness limit for whichever mounting method you choose.
- The wide VESA range does not guarantee compatibility with every large monitor; verify both displays’ hole patterns and weights.
Read the full review summary
The STAND-V257R is built around an unusual but useful arrangement: two ultrawide monitors mounted one above the other on a center pole.
It accommodates screens up to 57 inches, with different maximum weight limits for curved and flat screens, and offers tilt, swivel, rotation, and height adjustment.
A C-clamp or optional grommet mount attaches it to a desk, while detachable VESA plates and cable clips address setup and cord routing.
This design is a strong fit for workstations where horizontal desk width is limited or where two large displays need to share one vertical footprint.
The tradeoff is that a stacked pair can demand more vertical viewing space and careful positioning than a side-by-side setup. Compatibility is specific: check each display’s weight, VESA pattern, and the mounting surface dimensions before committing.
The buying factors
VIVO STAND-V257R Scorecard
Editorial scores reflect listed features and buyer fit; they are not laboratory measurements or customer ratings.
Large-screen support
The mount is designed for two ultrawides up to 57 inches, with substantial but distinct weight limits for flat and curved screens.
VESA flexibility
It supports five listed VESA patterns, including 200 x 200 mm, though buyers still need to confirm the exact pattern on each monitor.
Viewing adjustment
Tilt, swivel, rotation, and pole height adjustment provide useful ways to tailor screen placement.
Desk mounting options
A heavy-duty C-clamp and optional grommet mounting accommodate different desk layouts within stated thickness limits.
Cable organization
Clips on the center pole help route power and AV cords, although the described cable management is focused on that pole.
Setup versatility
The plates detach for easier screen mounting, but a vertically stacked pair of large displays still calls for planning around reach and viewing height.
Key Features and Specifications of VIVO STAND-V257R
- Supports two ultrawide screens up to 57 inches; the maximum supported weight is 48.4 lb per curved screen or 59.4 lb per flat screen.
- Also supports TVs up to 43 inches, subject to the mount’s other compatibility requirements.
- Offers +55° to -35° tilt, 132° swivel on the bottom arm, 360° swivel on the top arm, 180° rotation on the bottom arm, and 360° rotation on the top arm.
- Screen height adjusts along the center pole.
- Attaches with a C-clamp to surfaces up to 1.45 inches thick, or with an optional grommet mount on surfaces up to 1.26 inches thick.
- Detachable VESA plates support 75 x 75, 100 x 100, 200 x 100, 100 x 200, and 200 x 200 mm patterns.
- Cable clips on the center pole help organize power and AV cords; the mount includes a three-year warranty.
Pros and Cons of VIVO STAND-V257R
Pros
- Supports two very large ultrawide screens in a vertical arrangement.
- Allows different movement on the top and bottom arms, including full rotation on the top arm.
- Offers both clamp and optional grommet mounting.
- Detachable VESA plates simplify attaching compatible displays.
- The included cable clips help keep cords routed along the center pole.
Consider before buying
- The desk must fit within the specific thickness limit for whichever mounting method you choose.
- The wide VESA range does not guarantee compatibility with every large monitor; verify both displays’ hole patterns and weights.
- A stacked arrangement places one screen above the other, so buyers should consider whether the upper screen will be comfortable to view from their usual position.
Who Should Buy VIVO STAND-V257R?
Good fit
Consider the STAND-V257R if you have two compatible large ultrawides and want them aligned vertically to preserve horizontal desk space.
The high screen-size and weight limits, together with separate tilt and swivel ranges for each arm, make it a purpose-built option for that layout.
Its height adjustment and rotation controls give you room to orient the displays around a particular workflow.
Before ordering, check the weight and VESA pattern of each monitor, distinguishing the stated limits for curved and flat screens. Measure the desk at the mounting point and confirm that the C-clamp or optional grommet thickness range works.
It is also worth mapping the screen positions against your chair and normal eye line so the upper display does not end up inconveniently high.
Who should skip it
Skip this mount if your monitors fall outside its listed weight, size, or VESA limits, or if your desk cannot accept either mounting option within its thickness range.
If you want both screens at the same eye level, a vertically stacked design is unlikely to match that preference.
How the VIVO STAND-V257R Fits a Large Stacked Setup
Capacity is the first compatibility check
The headline 57-inch maximum is only one part of fit. The mount also sets different weight ceilings for curved and flat screens, and compatibility depends on the VESA pattern.
Confirm each display against all applicable limits rather than assuming that size alone settles the question. The listed TV compatibility extends to 43 inches, but the same mounting and weight checks remain relevant.
The arm movements suit deliberate positioning
The top and bottom arms have different movement ranges: the top arm can swivel and rotate through a full circle, while the bottom arm has a narrower swivel and rotation range.
Both can tilt, and screen height adjusts along the pole. That combination supports varied alignment choices, but the mount remains a stacked system, so plan the upper display’s position around your normal viewing posture.
Desk attachment needs a measurement
The C-clamp fits surfaces up to 1.45 inches thick, while the optional grommet mount supports surfaces up to 1.26 inches thick.
Measure where the mount will sit, not only the broad desktop, and check that the chosen attachment method works with the surface and available space.
These limits are especially relevant if the desk edge or grommet location has a shape that affects placement.
A few practical details aid installation
Detachable VESA plates can make it easier to attach a monitor before seating it on the mount.
Pole clips help guide power and AV cords, though buyers with many connections should consider how their own cable lengths and routing will work in a vertical arrangement.
The three-year warranty provides a stated coverage period for the mount.
Alternatives to VIVO STAND-V257R
Computer Monitor Arms alternative

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V120T Dual Ultrawide Monitor Mount
Choose the STAND-V257R if you specifically want a vertical stack or need its larger stated screen-size and weight limits.
The STAND-V120T is a more relevant fit if your screens are within its lower limits and its dual-arm arrangement better suits your intended placement; confirm the VESA and desk thickness requirements for either mount.
- The STAND-V120T is a dual-arm mount for ultrawides up to 49 inches and 44 lb each.
- It offers +85° to -25° tilt, 180° swivel, 360° rotation, center-pole height adjustment, and clamp or grommet mounting.
- The STAND-V257R mounts two ultrawides vertically and supports screens up to 57 inches, with weight limits that vary between curved and flat displays.
Computer Monitor Arms alternative

3,000+ ratings
Read Amazon ReviewsVIVO STAND-V002L Vertical Dual Monitor Stand
Choose the STAND-V002L if your monitors fit its smaller limits and you prefer a freestanding base.
The STAND-V257R is the better match for larger, heavier ultrawides and buyers who can use its desk attachment, but the appropriate choice depends on screen compatibility and the space available.
- The STAND-V002L is a freestanding vertical stand for two screens up to 34 inches and 22 lb each.
- Its base measures 15.4 x 12.4 inches, and its adjustable brackets support tilt, swivel, rotation, and pole height adjustment.
- The STAND-V257R is a desk-mounted option for two ultrawides up to 57 inches, using a clamp or optional grommet attachment.
Is VIVO STAND-V257R Worth It?
The VIVO STAND-V257R is worth considering when a vertical stack is the goal and both ultrawides fit its size, weight, VESA, and desk-mount limits.
Its broad adjustment range and two attachment options give the design useful flexibility for a large display setup.
Measure first and think through viewing height: the 57-inch screen capacity does not make every monitor compatible, and the upper screen’s position may not suit every desk or routine.
If the compatibility checks work and stacked placement fits your workspace, this mount is a focused solution for keeping two large displays in a vertical footprint.
Your review at a glance

2,000+ ratings
Read Amazon ReviewsVIVO STAND-V257R Dual Ultrawide Monitor Mount
A desk-clamp mount for buyers stacking two large ultrawide screens vertically, with broad adjustment and support for select VESA patterns.
- Supports two ultrawide screens up to 57 inches; the maximum supported weight is 48.4 lb per curved screen or 59.4 lb per flat screen.
- Also supports TVs up to 43 inches, subject to the mount’s other compatibility requirements.
- Offers +55° to -35° tilt, 132° swivel on the bottom arm, 360° swivel on the top arm, 180° rotation on the bottom arm, and 360° rotation on the top arm.
- Screen height adjusts along the center pole.